• Button Only Shift: This is a gear ratio change that occurs by moving the shift button.

• Combination Button/Lever Shift: This is a gear ratio change that occurs by moving both the shift button and shift lever.

• Lever Only Shift: This shift occurs when the shift lever is moved without moving the shift button. It results in a skip of a full gear ratio and should only be used when the vehicle is bobtail or lightly loaded.

• Do use normal Double-Clutching procedures when making lever shifts.

• Do preselect the shift button just prior to starting a shift

• Do allow for the shift to complete by waiting for the engine speed to decelerate to the proper speed for the next desired gear.

• Don’t slam or jerk the shift lever into gear

• Don’t coast with the shift lever in the neutral position.

• Don't move the gear shift lever to the center or left rail position when the vehicle speed is greater than 40 mph.

4. Can I get a copy of the Super 10 Transmission Driver's Manual?

Yes, you can download and view the Super 10 Drivers Manual using Adobe Acrobat Reader (go to the bottom of this page to download a copy)

Manual Download - super10.pdf

5. Are Product Specification Manuals Available for 10-Speed Transmissions?

Yes, we have the following downloads available in PDF Format.  If you do not have a copy of Adobe Acrobat Reader, you can download one by going to the bottom of this page.  Click on the filename to download.

6. Can I get a product specification sheets for the Tandem Drive Axle?
Yes, if you have Adobe Acrobat Reader (go to the bottom of this page to download a copy) you can download our product specification sheet for the Tandem Drive Axle - Hypoid Single Reductor for MT-40-143MS-N and TR-40-145/RT-40-145P.

Tandem Drive Axle MT-40-143MS-N Download - sp0167(2).pdf